Couldn't load pickup availability
- Made in the USA
- Rubust- Made to last
- Made to order
- Sustainable Materials
- Fast Delivery
- Competitive
The Classic Plush™ Mat offers an extra-plush carpet surface designed to soak up significantly more moisture and trap more dust than standard entrance mats. With a heavier pile weight and a resilient high-twist construction, it’s the go-to mat for busy entrances that demand more from their floor protection.
Crafted from solution-dyed nylon, the Classic Plush resists fading from UV exposure and bleach, while its sturdy nitrile rubber backing keeps it securely in place on hard floors or carpet. Ideal for high-traffic indoor locations like commercial entrances, hotel lobbies, and office buildings, this mat delivers excellent moisture control without compromising style or durability.
Key Features:
Superior Moisture Absorption – Plush surface retains up to 50% more moisture and dust than standard entrance mats
Crush-Resistant Nylon Fibres – High-twist, heat-set fibres help trap more dirt and extend mat life
Fade-Resistant & Bleach-Safe – Solution-dyed yarn maintains colour even after repeated washing
Slip-Resistant & Safe – Certified high-traction by the National Floor Safety Institute (NFSI)
Launderable & Easy to Maintain – Commercial-grade nitrile rubber backing withstands repeated wash cycles
Stays Put – Smooth or cleated backing options keep the mat firmly in place
Available Sizes:
Width | Lengths |
---|---|
2' (24") | 3' (35") |
2.5' (30") | 3' (35"), 4' (45") |
3' (35") | 4' (45"), 5' (58"), 10' (119") |
4' (45") | 6' (68"), 8' (95") |
5' (58") | 8' (95"), 10' (119"), 12' (143") |
6' (68") | 10' (119"), 12' (143") |
Custom sizes available in 3' (35"), 4' (45"), 5' (58"), and 6' (68") widths, with lengths up to 40'.
⚠️ Please note: Rubber mats may expand or contract with temperature. Size variance of 3–5% is normal.
Materials & Construction:
Surface:
Material: Solution-dyed type 6 nylon
Construction: Cut pile
Weight: 36 oz/yd²
Backing Substrate: Freudenberg LUTRADUR polyester spunbond non-woven fabric (3.8 oz/yd²)
Backing:
Material: Heavy-duty nitrile rubber
Thickness: 90-mil (body & border)
Options: Smooth or universal cleated backing
Total Mat Thickness: 3/8" (0.375")
Recommended For:
Commercial entrances and lobbies
Reception areas
Office buildings
High-traffic indoor entryways requiring strong moisture absorption
Care & Cleaning:
Regular Maintenance:
Vacuum daily in high-traffic zones; weekly elsewhere
Hose off or use extractor for deep cleaning
Always ensure the mat is completely dry before placing it back in service
Laundering Instructions (Nitrile-Backed Mats):
Flush: 2–3 minutes, medium water level, 120°F (49°C)
Optional Flush: Repeat for heavy soiling
Break: 2–3 minutes, high water level, 120°F (49°C), pH not exceeding 9.5
Rinse: 2 x 2 minutes, high water level, cold
Extract (low speed): 1–2 minutes
Shake Out: 1 minute (wheel rotates with drain open)
Extract (high speed): 3–5 minutes
Dry: 5–10 minutes, basket temp max 180°F (82°C)
Cool Down: 5 minutes
Lay mats flat after washing/drying. Allow to cool before rolling.
Avoid over-drying. If air-drying, increase final rinse to 140°F (60°C) to reduce moisture retention.



Want 10% Off a Logo Mat?
If you buy any one of our mats, we will give you 10% off a Logo mat.